During the use of cranes, you should ensure all the safety measures of industrial rigging. Below are some rules and instructions that you should follow in this regard.
Work With Qualified Personnel
When it comes to the worker for rigging, you must always hire or work with the qualified people. If you work with unskilled or naïve people in rigging, it can lead to any disasters and accidents. Rigging techniques should be properly followed in order to prevent any issues.
Conduct Thorough Inspection
According to experts in rigging, it all starts with thorough and detailed inspection of the site. You are also required to take into account the machines, cranes, various equipment and tools required. Make sure all things are in order and do not need repairing before they are used in rigging.
Document Technical Issues
During the inspection, you will have to note down the possible issues. It should also contain the possible malfunctions caused by the machines. Moreover, you can also document the repairs and maintenance required and what new or more tools will be needed in order to perform rigging safely.
Keep the Load Balanced
Many people make the worst mistake during rigging with the weight or load. Every crane has a certain load limit. In order to perform a safe process, the rules regarding the load should be followed. Moreover, keep the load balanced so that it does not fall when it is lifted up.
Make Sure the Load Does Not Injure People
Eventualities and accidents are common on the crane sites when the weight is lifted. However, if the load falls or there are some such problems, the people should be safe. This will be possible when they are staying at some distance and not too near the crane or rigging installations.
Land All Loads
It is critical to guide the users that load must not be left suspended when the system is not under use. All the load or other materials should be landed so that any eventuality can be prevented and everyone remains safe during the process. Otherwise wind can lead to troubles when the pending load falls.
Only Use Strong Slings
You have to be extra careful about the rigging slings that are to be used in rigging. You must ensure the slings are safe and durable. Moreover, the tension must be tested in order to match the vertical capacity of each sling. This test can save you from any big disasters and issues.
Use Spotter During Lifting
Spotters are actually very helpful and make it easy to view the surrounding when you are a rigger. Sometimes, obstacles block view and make it hard to place things in the right position. The spotter will come in handy in this regard and improves visibility while you are operating the machine.
Know Your Rigging Equipment
Knowledge and information about the rigging equipment is very much important in your construction project as it helps you maintain the load limit and not hurt anyone. The rigger load manual should be displayed on the site so that the operators as well as workers keep the load limit and equipment needed in mind.
Hook It Safely
After the job has been done, the tools and rigging equipment need to be stored in a safe play. It is also called hooking. This is very much important because you will need the machines and cranes for use next time. Therefore they should be kept in a safe place.
Never Work Under Suspended Loads
It becomes really essential to point out that some people make this mistake during rigging. What they do is to work or stay under the suspended load. It is extremely dangerous as you do not know when the slings fail and load falls onto you.
Do Not Lift People With a Hoist
Lifting people with the help of a hoist is also dangerous. If the hoist fails, the people on the host will meet a severe accident and can have injuries which may be fatal. That is why always avoid lifting people with the hoist.
That’s it. Some of the most critical and important tips of rigging are discussed here that will help you all. Hiring experienced and reputable rigging services MD aids in preventing disasters.